Blackened Wall Plate - 131 Blackened Wall Plate - 131

Blackened Wall Plate - 131
Discounts: Make bigger savings the more you buy. Savings are applied automatically in your basket. Full discount details

Blackened tube clamp positional fixing flange which is often used where rails meet walls on level sites.

Please note that these products are for indoor use only and are NOT suitable for use outside. These products have been treated to give the aged effect and have not been powder coated.

Warning This fitting is not recommended as a baseplate to support hand railing, guardrailing, parapets, balustrades or other structures. Please use clamp type 132 as an alternative.

Please note: The 26.9mm Wall Clamp fixing holes are not countersunk.

All our clamps are supplied complete with grub screws. Additional replacement screws can also be purchased click here

Please note that the tube we stock goes into the fittings by approximately 25mm to 30mm. This figure is for guidance only.

ImportantThis product contains fixing holes.We do not recommend pre-drilling prior to receiving the product as there can be irregularities in casting that can produce small variations in the size of the holes. Any measurements shown should be regarded as a guideline only. 

Please scroll the page to ensure you see the full list of products available
DescriptionWeightDimensionsPrice
(Ex VAT)
Price
(Inc VAT)
Quantity
ABCD
Blackened Wall Plate 26.9mm tube diameter - 131Blackened Wall Plate 26.9mm tube diameter - 131
£3.71 ex VAT, £4.45 inc VAT
0.31 kg42.483.059.0£3.71£4.45
Blackened Wall Plate 33.7mm tube diameter - 131Blackened Wall Plate 33.7mm tube diameter - 131
£5.39 ex VAT, £6.47 inc VAT
0.48 kg48.089.065.0£5.39£6.47
Blackened Wall Plate 42.4mm tube diameter - 131Blackened Wall Plate 42.4mm tube diameter - 131
£6.62 ex VAT, £7.94 inc VAT
0.67 kg51.0102.076.0£6.62£7.94
Blackened Wall Plate 48.3mm tube diameter - 131Blackened Wall Plate 48.3mm tube diameter - 131
£9.00 ex VAT, £10.80 inc VAT
0.92 kg59.0114.088.5£9.00£10.80
M6 x 50 Ankerbolts (Thunderbolt) pack of 4 - for use with 5mm drilled hole - suitable for tube clamp parts 131 & 143M6 x 50 Ankerbolts (Thunderbolt) pack of 4 - for use with 5mm drilled hole - suitable for tube clamp parts 131 & 143
£2.15 ex VAT, £2.58 inc VAT
0.03 kg£2.15£2.58
783132 5mm x 150mm drillbit - (for use with M6 x 50 ankerbolts)783132 5mm x 150mm drillbit - (for use with M6 x 50 ankerbolts)
£0.59 ex VAT, £0.71 inc VAT
0.02 kg£0.59£0.71
571512 7mm x 150mm drillbit - suitable for tube clamp wall plates 131 & 143571512 7mm x 150mm drillbit - suitable for tube clamp wall plates 131 & 143
£0.81 ex VAT, £0.97 inc VAT
0.09 kg£0.81£0.97
633644 SDS 5mm x 160mm drill bit - (for use with M6 x 50 ankerbolts)633644 SDS 5mm x 160mm drill bit - (for use with M6 x 50 ankerbolts)
£1.41 ex VAT, £1.69 inc VAT
0.04 kg£1.41£1.69
427604 SDS 7mm x 160mm drill bit - suitable for tube clamp wall plates 131 & 143 for 26.9/33.7/42.4/48.3427604 SDS 7mm x 160mm drill bit - suitable for tube clamp wall plates 131 & 143 for 26.9/33.7/42.4/48.3
£1.93 ex VAT, £2.32 inc VAT
0.06 kg£1.93£2.32
Fixing kits for parts 131 & 143, 50mm x 5mm counter sunk wood screws & wall plugs - pack of 10 for 26.9/33.7/42.4/48.3Fixing kits for parts 131 & 143, 50mm x 5mm counter sunk wood screws & wall plugs - pack of 10 for 26.9/33.7/42.4/48.3
£2.10 ex VAT, £2.52 inc VAT
0.03 kg£2.10£2.52