Wall Fixed Single Support Pull Up Bar
Galvanised tube and tube clamp pull up bar kit supplied with all the parts you need to assemble on site. The frame is approximately 580mm high, 610mm long and 1330mm wide.
The kit is made from strong 33.7mm galvanised tube and tube clamp parts.
The kit comprises of the following:
|4 x Galvanised Tubes at 580mm|
|2 x Galvanised Tubes at 610mm|
|1 x Galvanised Tube at 1330mm|
|2 x 104|
|4 x 129|
|4 x 133|
|4 x 146|
|2 x 161||2 x 198|
The kit is supplied with all the fixings required to install your kit and also includes an 8mm drill bit.
Please note that installation, suitability and stability of the frame (prior to and during any use) is entirely at the customers own risk and it is the customers responsibility to ensure that they are satisfied that the frame is suitable for the person who will be using it and it is sited safely within the intended area away from any possible dangers, e.g. fences or garden accessories. The Metal Store will not accept any liability whatsoever for any damage/injury caused by the installation and use of this product including without limitation, indirect or consequential loss or damage, or any loss or damage.
then we’re just a call away
The Metal Store is pleased to offer discounts on the following amounts (ex VAT). All discounts are automatically applied at checkout.
- 2.5% off orders over £250 + vat
- 5% off orders over £500 + vat
- 7.5% off orders over £750 + vat
- 10% off orders over £1,000 + vat
- 12.5% off orders over £2,000 + vat
- 15% off orders over £3,000 + vat