- Other Metal Cutting Services – Can I get a quotation?
- What falls within your FREE Metal Cutting Service?
1. Other Metal Cutting Services – Can I get a quotation?
Yes, we are more than happy to provide you with a quote.
Laser Cutting – We can arrange your laser cutting needs, working to plus or minus 0.25mm tolerances in mild steel sheets, aluminium sheets and stainless steel sheets – please email us a drawing on firstname.lastname@example.org so we can quote you for your requirements.
Profile Cutting – A cost effective option for your mild steel cutting, not quite as accurate as laser cutting but much cheaper, profile cutting works on a tolerance of plus or minus 1.0mm. Again, send us a drawing on email@example.com so we can quote you for your requirements.
2. What falls within your FREE Metal Cutting Service?
A FREE* basic metal cutting service is available for either one off’s or large quantities. You may want your 3 metre length cut into to 1 metre lengths for example, or an exact bespoke size, ready for your project. If so, we can help, for FREE!* Simply complete your order on line, add your cutting instructions in the box shown and confirm if you require any offcuts from your order. That's it!
Important information: Although we aim to cut as accurately as possible we work to a tolerance of plus or minus 1mm. We are unable to cut down Corrugated Sheets Mild Steel Walkway and Galvanised Mild Steel Walkway. These are only sold in the sizes shown on the website. Also please note we are unable to cut lengths of metal i.e. box section, angle etc. down the width of the metal to reduce the size from say 40mm x 40mm to 35mm x 30mm. This requires a machining operation i.e milling, as we are a stockholder and not a fabrication company we do not have a machining facilities to offer this service but you may be able to find a local subcontract precision engineering company to provide this service for you.
*Please note: There is a maximum of 10 FREE cuts per length or sheet ordered. If you require any further cuts, i.e. from cut 11 upwards an excess cutting charge applies. You can add excess cutting charge to your order. Our FREE cutting service only includes straight bandsaw cuts on our metal lengths or straight guillotine cutting to size on our sheets and does not include any ‘cut outs’ or ‘shapes’. If you require any ‘cut outs’ or ‘shapes’ we will do our best to help. There will be a charge for this service. Please contact us on firstname.lastname@example.org for a quotation.
If you are ordering by phone you can tell us your cutting requirements and then confirm them by email here email@example.com
The Metal Store is pleased to offer discounts on the following amounts (ex VAT). All discounts are automatically applied at checkout.
- 2.5% off orders over £250 + vat
- 5% off orders over £500 + vat
- 7.5% off orders over £750 + vat
- 10% off orders over £1,000 + vat
- 12.5% off orders over £2,000 + vat
- 15% off orders over £3,000 + vat
then we’re just a call away