Swivel Locating Flange - 169
A versatile swivel fitting, useful for fixing angled tubes to walls etc. Fixing holes suit a wide range of common mechanical and chemical masonry anchors which we should be pleased to quote for on request. The assembly is riveted together, although items can be supplied separately as 169M and 173F.
Warning: To provide sufficient stability, whole structures must not be made from swivel fittings alone.
The tubes are shown in red for marketing purposes only, to show the detail on the clamps.
All our clamps are supplied complete with grub screws. Additional replacement screws can also be purchased click here
Please note that the galvanised tube we stock goes into the fittings by approximately 25mm to 30mm. This figure is for guidance only.
Please note the M0 x60 thunder bolt is NOT suitable for use with 26.9mm tube clamps.
Important: This product contains fixing holes. We do not recommend pre-drilling prior to receiving the product as there can be irregularities in casting that can produce small variations in the size of the holes. Any measurements shown should be regarded as a guideline only.
then we’re just a call away